Bomix® Epoxy Anchor FastSet

FastSet Epoxy Anchor

FastSet™ Bomix® Anchor Epoxy is a two-component, high-strength, non-sag, structural epoxy.

  • Suitable for horizontal and vertical applications
  • Suitable for fixing in grouted blocks, unreinforced masonry, anchors and seismic bracing.
  • Solvent-free, low odour, highly durable, moisture resistant and non-sagging.

Product ID:

FastSet™ Bomix® Anchoring Epoxy is used for anchoring into concrete and masonry substrates including: Anchoring, Bolts, Threaded rods, Reinforcing bars, Dowels, Pins, Ramps

The recommended minimum depth of the anchor hole is 25.4 mm (1 in).

Setting time
10 minutes, at 24 °C (75 °F).

254 ml