Products

Fast-setting, fast-hardening concrete mix. Ready for use within a few hours of final setting. Ideal for any job requiring rapid commissioning. Strength of 20.7 MPa at 3 hours and 48.3 MPa at 28 days.

FastSet™ All-Crete™ HPC (High Performance Cement) is a commercial-grade grout and repair mortar with high initial strength.

FastSet™ HPC (High Performance Cement) Rapid-Set Repair Mortar is a high-strength, rapid-setting, polymer-modified, shrinkage-compensated repair material designed for vertical and overhanging structural repairs to concrete and masonry surfaces.

Rock dust is a very fine aggregate obtained by crushing limestone. It is very fine and is used as a finishing layer for paving stones, patio blocks and patio slabs. It can also be used as a filler between the slabs or flat stones of a patio.

Specialized concrete mix that hardens in 25 minutes. Allows foot traffic after 5 hours. Strength of 20 MPa at 24 hours and 45 MPa at 28 days.

Crushed stone is obtained by crushing limestone and is available in four sizes (1/4″; 1/2″; 0 to 3/ 4″; and 3/4″ net). It can be used with sand cement to make concrete, or as an underlayment for drainage and as a finish course for interlocking paving.

Bomix® High Performance Polymer Construction Adhesive is a one-component, flexible, all purpose adhesive.

A common natural sand, dried and sifted.

Crushed stone is obtained by crushing limestone and is available in four sizes (1/4″; 1/2″; 0 to 3/ 4″; and 3/4″ net). It can be used with sand cement to make concrete, or as an underlayment for drainage and as a finish course for interlocking paving.

Crushed stone is obtained by crushing limestone and is available in four sizes (1/4″; 1/2″; 0 to 3/ 4″; and 3/4″ net). It can be used with sand cement to make concrete, or as an underlayment for drainage and as a finish course for interlocking paving.